Rock Lobster 9’0

Our best seller, and a must have for the daily east-coast surfer. With a consistent rocker, concaved nose and flowing template this longboard is a magic carpet ride on almost any size day. Ride as a 2+1 or single fin.

Hippy Flip

6’1” x 18 ¾” x 2 5/8”

 

Designed with a slightly wider nose and a pulled in rounded pin tail, the board hides volume and allows the rider to get into waves earlier. 
   

Made from a stringerless EPS core with parabolic (and optional center) carbon reinforcement. This provides a consistent, fast spring back flex pattern, in a very light, strong and performance oriented shortboard. Pictured with a single fin box +2, but can also be set up as a bonzer, thruster setup, even a quad.
 

"I designed this board for myself when we got a batch of stringerless blanks, more as a prototype and the board worked really really well in more conditions than I first expected. Super snappy, you can really feel the rebound from the carbon. I'm sold." - Andy McD

Annihilator 6’8”

Orginally known as the Annihil8tor for Greg @ Team Eight Snowboards, this is a geat shortboard for New England. Wide round template, hiding volume through the nose and midsection, and thinning through the tail to allow for great turns and release. Lower rocker with a single to double concave, with a subtle V out the tail. Best as either a thruster, quad or 5 fin set up.

Hand Shaped In Maine

 

All of our boards are custom shaped and glassed right here in Maine. These are only a few of our most popular shapes. If you have an idea that you want to bring to life, stop by the shop or send us an email and we can get started on it today. Board turn around varies on the season but it typically takes 2-3 weeks. 

 boards 

1/4
The 007

High performance shortboard template, loves powerful waves. The 007 has full single concave through the tail.  Available in thruster, quad or five fin set-up.18 1/4" – 19 1/2" wide,   1 5/8" - 2 1/2"  thick.

Bushmaster

Dimensions are custom to fit the surfer but the bushmaster is a serious board built for serious waves. There is considerable foam throughout board to make for faster paddling, but has a thinned out tail allowing you to still turn and hold you in those critical sections. Double concave with a slight v out the tail, this board was designed to push the envelope.
 

1/5
Canadian Candy

Great board for everyday surfing, this model has a round tail to keep your turns loose with a wider nose to make catching waves easier. Thick in the middle with thinned out rails and tail, this is a great board that you won’t get sick of.

Ideal size range 6'2" - 7'6"  with any combo of fin set up: 2+1, thruster , quad, 5 fin,  or single fin.
 

1/3

1/5
The Stinger

7'4" x 21 1/2" x 3"

 

Ben Ipa inspired this 7'4" stinger works great as an everyday board. The hip in the mid-rail gives a great pivot point between the feet, for looser and juicier turns. The Stinger has a little more foam and a mid to low rocker profile which enables you to have more paddle power. 

1/7
The Space Invader 

9'2" x 22 1/2" x 3

 

 

Classic noserider template. The Space Invader has mid-low rocker, just the right amount of nose concave, and a wider tail which gives stabilty to those willing to walk the plank. 

1/2
TSM a.k.a Terry Senate Model 

5'8" x 20" x 2 1/2" 

 

Learned this template under the watchful eye of Andy's shaping mentor, Terry Senate of San Clemente, CA. Wide nose and round tail leaves a fuller template throughout the whole board. 

Shaped with a stringerless EPS blank, this board is extremely light. We glassed the TSM with single 6 and a carbon fiber vector net on the deck, a single 4 on the bottom, and reinforced the rails with carbon, its easy to say that this board was built to last.  

Technora

 

Stringerless EPS blank with blue 'technora fiber' for reinforcement. Board is really light weight yet super strong. With a wider nose template and a squash tail, this board can be surfed in a variety of conditions. Board shown has single concave throughout the whole board.

1/2

The Problem Child

6'3" x 19" x 2"5/8

 

This board is a 'mini step-up' board for New England. Slightly pulled in tail gives the board bite and drive through turns, this template loves big carving turns and sitting deep in the pocket. Single to double concave, with V out the tail, makes this board easy to move around. 

Custom SUP 

9'10" x 36" x 4"

 

Dimensions are custom depending on what you want out of your SUP. Flatwater stability, speed, surfing, you name it. All SUP's are double carbon reinforced, and guarenteed to last. 

1/2

Big Guy Fish

a.k.a WWWS (What Would Wis Surf)

7'10" x 24" x 3"1/8

 

This board was made for local surfing legend Wis Davies. Wis wanted a board that he could surf in almost any condition. Something with enough foam to surf on those smaller days, and with a thinned out tail and rails to not hinder on the bigger days. What we got was this board and it seems to be a winning combo. 

 

1/6

 (207)939 6016     134 Blackpoint Rd, Scarborough, ME 04074

  • White Instagram Icon
  • Facebook Clean
IMG_20160726_132156